top of page

AOS 5 V5

Next level flight performance with AOS X-Cell.
Ultra Durable 7075-T6 Camera Cage.
Easy to build and a joy to work on.

Key Features

Easy to build

The AOS 5 V5 is designed to be the easiest and most user-friendly FPV frame to build. It's perfect for beginners and experts alike with plenty of space, easy access to every screw and steel press-nuts to reinforce the arm and stack mountings.

Easy to build

Flexible Battery Mounting

Experiment with different battery configurations by choosing between lengthwise or toilet tank battery mounting options. This flexibility allows you to optimize your drone's balance and performance based on your flying style and preferences.

Flexible Battery Mounting

Metal Camera Cage

The AOS 5 V5 is equipped with an ultra-durable 7075 Aluminium Camera Cage that accommodates 14 - 20mm cameras, ensuring perfect compatibility with a wide range of FPV camera systems. The frame allows for hard or soft mounting of all popular camera systems including Analog, WS Avatar, HDZero and DJI. O3 ND FIlters are supported. STL files for TPU camera mounts are linked above.

Metal Camera Cage

Vibration Isolation

Say goodbye to unwanted vibrations that can hinder your drone's performance. The AOS 5 V5 boasts the new patent pending AOS X-Cell anti-vibration mount for the flight control stack, reducing vibrations by up to 50% (compared to AOS 5 EVO). This groundbreaking feature enables you to run lower filtering, dial in higher PID gains, and achieve unparalleled flight performance.

Vibration Isolation

Technical Specs

  • Requires a ~200mm Camera Cable available from all good FPV retailers

  • ~129g with 6mm arms (standard) ~119g with 5mm arms (lightweight)

  • Designed for up to 5.3 inch props, no props in view with O3 Superview.

  • Reinforced 7075 Aluminium Camera Cage

  • Up to three 30.5 or 20 mm stacks, up to two 25.5 mm stacks

  • 29x29mm GoPro mounting holes in top plate with installed press-nuts

  • XT60 pass through top plate

  • Captive battery strap slots for regular and toilet tank mounting

  • Fits all common VTXs (DJI, HDZero, WalkSnail Avatar, Analog)

  • Soft mounts DJI O3 + ND filters, Hard/Soft mounts 19mm camera (STLs below)

  • Recommended motor size: 2207

  • 16x16 up to 19x19mm motor mounting

  • 32mm Rear Standoff Spacing (compatible with all AOS 5 antenna mounts)

Where to Buy

Build Resources

AOS V5 Series

AOS 5 V5 Build Guide

Tuning Guides

AOS Betaflight Presets

Betaflight 4.4 Tuning Guide

3D Prints

AOS 5 V5 GoPro Mount

AOS 5 V5 GoPro Mount

M3 SMA VTX Antenna Mount

M3 SMA VTX Antenna Mount

AOS 5 V5 Arm Guards

AOS 5 V5 Arm Guards

M3 Go Pro Mount

AOS M3 Go Pro Mount

AOS ELRS Antenna Mount

AOS ELRS Antenna Mount

M3 VTX Antenna Mount

VTX Antenna Mount M3

AOS XT60 Mount

AOS XT60 Mount

AOS EVO/V5 Camera Mounts

AOS EVO/V5 Camera Mounts

bottom of page