The AOS UL10 uses 2 mm Carbon Plates to hold and protect the camera. These are stiffer, lighter and cheaper to replace than aluminum or titanium.

The camera plates include 2 standoffs to maximise durability and a cutout pattern that supports DJI O3 and all typical19 - 20 mm FPV cameras.

The UL10's vertical truss arm structure is super-light and super-stiff, providing maximum flight performance for the smoothest footage whilst saving weight to increase the flight time. Thin vertical arms unblock the propeller thrust column to increase speed, range and propulsion efficiency. They also give the frame a striking and unique look, the AOS UL10 stands out from the crowd while delivering unmatched performance.

Both of these plates are 2.5mm thick to provide an optimal balance between strength, stiffness and weight. Large FPV frames can struggle with the increased vibration from larger props and motors. AOS X-Cell provides up to a 50% reduction in vibration amplitude for key resonant modes. This allows less filtering to be run on the flight controller, improving propwash handling and the stability of flight footage.

There are mountings for three 30.5x30.5mm or 20x20mm stacks with plenty of space in between for the receiver, capacitor and other accessories.

The GoPro mounting pattern on the AOS UL10 is identical to all other AOS EVO frames so any mount designed for any of these frames will fit and work perfectly on the others.

The GoPro is secured by 4x M3 screws so you can be confident that the mount will not be going anywhere in a hurry.